Opened the service power panel (meter base on the outside of that wall, and discovered that the electrician who wired the building ran the grounds and neutrals to a common bar. Is this allowed or required?
The riding mower is still broken down and in my way. Someone changed the oil and let more run on the floor than they captured.
I set out 32,000 lumens of LED lights on 10' high joist so I was high for a while there.
I have concluded that none of Glen's benches/worktables will accommodate my paint shaker so I began construction of one which will sit on the concrete and attach to 3 wall studs. It's dedicated to the shaker.
The service to the garage is separate from the house so it's probably only a 50 amp service. I'm not using existing breakers or wiring. I'm installing a 30 amp and a 20 amp this morning and setting outlets for each (10 ga wire). The 30 is dedicated to my compressor and welder and one 20 amp will service any electric tools like my buffer.